889 Culti-Lister

16 Row Culti-Lister

Overview

Precision Bed Preparation

The Model 889 Culti-Lister gives you consistent beds across the field. With a parallel-link gang that conforms to your field like your planter units, you’ll get identical beds from one pass to the next.

A vibrant mix of attachments and ground-engaging tools fit this machine to your farming practices.

Plus, a few simple changes turns this machine into a high-speed cultivator or irrigation water furrow maintainer for different times of the year.

Literature

 

Features

Model 889 Features

  • Parallel linkage incorporates polymer bushings that never need greasing.
  • Height adjustable front tooling.
  • Selection of rear tooling.
  • Exclusive rigid shank with foot piece. Holds our buster or bedding sweep firmly in place for straight, true rows, and allows pin-point adjustment of cultivator sweep.
  • Front slot for cross tube to accommodate additional tools.
  • Rugged gang construction features reinforced connection points for long life.

Gang Operating Features

  • Optimized tool spacing.
  • Maximum trash and soil flow between tillage components is based on many years of field experience.
  • Only one grease zerk per row. Greasing interval is once each operating season.

Parallel Linkage

  • 3/4” Diameter Pivot Bolts
  • Polymer wear bushings keep the linkage assembly tight and do not require grease.
  • U-Bolt mounted clamps give more vertical travel.
  • Wrap-around clamp keeps gang straight and prevents “walking” in side-draft
  • conditions, and moves the gang forward, making the unit easier to lift.

 Tooling Bar

  • Optional Quick Adjust tooling receiver for easy pin adjusting in 1/2” increments.

 Adjustable Front Coulter

  • 1-1/8” Arbor Bolt
  • Two heavy 208 series sealed ball bearings with triple-lip seals in each coulter hub.
  • Adjust coulter depth with easy adjusting handle.

Depth Control Tire

  • Front 18×8.5×8 8-ply tire provides positive depth control.
  • Four-hole hub equipped w/2 triple-lip sealed ball bearings.

Non-Adjust Front Coulter

  • 1-1/8” Arbor Bolt
  • Two heavy 208 series sealed ball bearings with triple-lip seals in each coulter hub.
  • Available in fixed or swivel.

 Barring Off Discs

  • Peel weeds away from young, tender crops or hill dirt into the root base of more mature crops.
  • Compound angle settings allow you to pitch the cutting edge away from the crop to prevent root pruning.

 Crop Hoods and Shields

  • Adjustable side-to-side for any row width, front-to-back to match sweep placement, up and down for desired protection.
  • Set fenders to control flow for maximum protection or raise to push soil into the base of the crop.
  • Parallel link collision protection.

Rear Shanks

  • Adjustable foot piece offers friction trip protection.
  • Mount Sweep for clean-out and cultivating operations or mount buster for lister operations.

Rear Bedding Sweep

  • Builds and shapes beds.
  • Adjusts to vary bed height.

Rear Cultivator Sweep

Undercuts weeds and pushes dirt onto base of mature plants.

Irrigation Shovel

Clears furrows for efficient irrigation flow.

Inter-row Ripper Shank

  • Height adjustable 1×3 or 1×4 shank, cut from high-strength material to withstand deep soil penetration. Standard fertilizer tubes for liquid fertilizer application.
  • 1×3 shank scarfed on soil edge and equipped with chromium carbide point.
  • 1×4 shank features cast sharpened chromium carbide shin.

 

Options

Parts and Manuals

Model 889 Parts and User Manual

Model 888 Parts and User Manual

Gallery

 

Video

Precision Bed Preparation

The Model 889 Culti-Lister gives you consistent beds across the field. With a parallel-link gang that conforms to your field like your planter units, you’ll get identical beds from one pass to the next.

A vibrant mix of attachments and ground-engaging tools fit this machine to your farming practices.

Plus, a few simple changes turns this machine into a high-speed cultivator or irrigation water furrow maintainer for different times of the year.

Literature

 

Model 889 Features

  • Parallel linkage incorporates polymer bushings that never need greasing.
  • Height adjustable front tooling.
  • Selection of rear tooling.
  • Exclusive rigid shank with foot piece. Holds our buster or bedding sweep firmly in place for straight, true rows, and allows pin-point adjustment of cultivator sweep.
  • Front slot for cross tube to accommodate additional tools.
  • Rugged gang construction features reinforced connection points for long life.

Gang Operating Features

  • Optimized tool spacing.
  • Maximum trash and soil flow between tillage components is based on many years of field experience.
  • Only one grease zerk per row. Greasing interval is once each operating season.

Parallel Linkage

  • 3/4” Diameter Pivot Bolts
  • Polymer wear bushings keep the linkage assembly tight and do not require grease.
  • U-Bolt mounted clamps give more vertical travel.
  • Wrap-around clamp keeps gang straight and prevents “walking” in side-draft
  • conditions, and moves the gang forward, making the unit easier to lift.

 Tooling Bar

  • Optional Quick Adjust tooling receiver for easy pin adjusting in 1/2” increments.

 Adjustable Front Coulter

  • 1-1/8” Arbor Bolt
  • Two heavy 208 series sealed ball bearings with triple-lip seals in each coulter hub.
  • Adjust coulter depth with easy adjusting handle.

Depth Control Tire

  • Front 18×8.5×8 8-ply tire provides positive depth control.
  • Four-hole hub equipped w/2 triple-lip sealed ball bearings.

Non-Adjust Front Coulter

  • 1-1/8” Arbor Bolt
  • Two heavy 208 series sealed ball bearings with triple-lip seals in each coulter hub.
  • Available in fixed or swivel.

 Barring Off Discs

  • Peel weeds away from young, tender crops or hill dirt into the root base of more mature crops.
  • Compound angle settings allow you to pitch the cutting edge away from the crop to prevent root pruning.

 Crop Hoods and Shields

  • Adjustable side-to-side for any row width, front-to-back to match sweep placement, up and down for desired protection.
  • Set fenders to control flow for maximum protection or raise to push soil into the base of the crop.
  • Parallel link collision protection.

Rear Shanks

  • Adjustable foot piece offers friction trip protection.
  • Mount Sweep for clean-out and cultivating operations or mount buster for lister operations.

Rear Bedding Sweep

  • Builds and shapes beds.
  • Adjusts to vary bed height.

Rear Cultivator Sweep

Undercuts weeds and pushes dirt onto base of mature plants.

Irrigation Shovel

Clears furrows for efficient irrigation flow.

Inter-row Ripper Shank

  • Height adjustable 1×3 or 1×4 shank, cut from high-strength material to withstand deep soil penetration. Standard fertilizer tubes for liquid fertilizer application.
  • 1×3 shank scarfed on soil edge and equipped with chromium carbide point.
  • 1×4 shank features cast sharpened chromium carbide shin.

 

 

Copyright © 2017 Bigham Brothers, INC. All rights reserved.

Menu